Photo By jjn
If your home’s water comes from a well system, your home will likely suffer from low water pressure. Many homeowners live with low water pressure as they don’t know what to do about the situation. There are many methods that a plumbing service can use to improve your water pressure.
If you live in Katy, TX, or the surrounding area and are searching for a plumbing service, don’t hesitate to contact bluefrog Plumbing + Drain. The company can test your water pressure and recommend ways to improve the situation. They are also available for many other services, including drain cleaning, leak detection, and water heater installation. bluefrog Plumbing + Drain can also provide an emergency plumber 24/7.
Let’s look at some of the signs of low water pressure and what you can do about them. We’ll tell you how to check your home’s water pressure and give advice about when to call in the help of a professional plumbing service.
Signs of low water pressure
One of the main signs of low water pressure is that showers and other plumbing fixtures and appliances don’t work very well. When you have low water pressure in your home, it’s likely that your shower won’t run very fast.
You may also notice that your bath or toilet takes longer to fill up. Most baths can hold up to 80 liters of water, and when the water pressure is very low, the faucets will be running slowly, and it will take a long time for your bath to fill. A toilet cistern can hold up to 7.5 liters of water, and after flushing the toilet, you may notice that it’s slow to fill up again if the water pressure is low.
Another sign of low water pressure is that your electric shower may cut out if a toilet is flushed elsewhere in the house. This is because electric showers include a safety mechanism that turns off the water so that you aren’t scalded. An electric shower will switch itself off if the water pressure in your home drops below a safe level.
How to improve your homes water pressure
There are many things that you can do with the help of a plumbing service to improve the water pressure in your home. If your household is suffering due to low water pressure, try out the following:
Service your pressure tank
The average homeowner should have a water pressure of between 40 and 60 psi. If your water pressure is lower than this, it’s likely that your home’s plumbing features and appliances won’t work very well. If you have a well system and want to increase your water pressure, you can complete the following steps. It may, however, be best to call in the help of your local plumbing professionals.
- First, you’ll need to turn off the circuit that is dedicated to your well pump. If you don’t know how to do this, you’ll need a plumber to help.
- You’ll then be able to test the air fill valve by using an air pressure gauge. This will give you the pressure reading and allow you to see whether it is within the normal range.
- If your home’s water pressure is 40 psi or below, you’ll need to increase it slightly so that your home’s water pressure is correct. You can do this by adjusting the pressure switch. You’ll find the pressure switch located on the pipe that connects the well and the pressure tank.
- Once you have adjusted the water pressure slightly, you can turn the circuit back on and test your water pressure by opening a faucet. Repeat the above steps if necessary until your water pressure is correct. If you’re having any issues adjusting your water pressure, it’s best to call in the help of a plumber.
Have your pipes checked
One of the main reasons for low water pressure is if the pipes have become clogged with lots of sediment or minerals. Water contains mineral deposits that it picks up as it travels through the earth. Sediment and minerals can cause a build-up to occur, and this is especially common in homes with hard water. Sediments can cause damage to plumb, including pipes, plumbing fixtures, and appliances, which will stop the water from flowing smoothly.
To solve this problem, it’s best to have your pipes inspected by a plumbing service that may recommend that the pipes are cleaned. You may also like to have a water softener installed to prevent issues in the future.
Install a new pressure system
Another way to ensure that your pressure tank is able to provide you with the correct water pressure, you may like to consider having a constant pressure system installed. This piece of equipment is installed directly on the waterline as it enters your property. It will stop the water pressure from dropping and works well even when multiple appliances and fixtures are being used.
If you’re unsure whether your home needs to have a constant pressure system installed, you can contact your local plumbing service, who will assess the situation, find the cause of your low water pressure and decide on the best solution for your home’s well water system!
bluefrog Plumbing + Drain, Plumbing Service
If you live in Katy, TX, or the surrounding area and are searching for a plumbing service, you may like to contact bluefrog Plumbing + Drain. The company can test your home’s water pressure and will recommend ways to improve the situation. They can install a constant pressure system if that’s what your home needs.
bluefrog Plumbing + Drain are also available for many other plumbing services, including drain cleaning, leak detection, and water heater installation. The team can also provide an emergency plumber 24/7.
Contact bluefrog Plumbing + Drain of West Houston today to find out how the company can help to increase your water pressure!