Reasons Your PVC Plumbing Pipes Are Warping And How A Plumber Near Me Can Help | Katy, TX

Reasons Your PVC Plumbing Pipes Are Warping And How A Plumber Near Me Can Help | Katy, TX

PVC pipes are some of the most popular plumbing materials because they’re affordable, durable, and resistant to corrosion. But sometimes PVC pipes can warp, leading to all sorts of problems. For example, warped pipes can cause water leaks, leading to water damage. Therefore, if your PVC pipes are warped, it’s important to call a plumber in Katy, TX as soon as possible so they can fix the problem before it leads to any serious damage. This article will explain why your PVC pipes might be warping and how a plumber near me can help.

Water Pressure Is Excessively High

It’s no secret that extreme pressure can cause objects to warp. The same is true for your home’s PVC plumbing pipes. If the water pressure in your home is excessively high, it can stress the pipes and cause them to warp. You can check the water pressure in your home with a simple pressure gauge. If it is higher than 60 psi, then you may need to have a professional adjust it. A plumber near me can install a pressure-reducing valve to help keep the water pressure in your home at a safe level and prevent your PVC pipes from warping.

Poorly Made Joints

In most cases, the warping of PVC pipes starts with poorly made joints. Over time, water can seep into these imperfections and loosen the glue that holds the pipes together. As the water seeps in and the glue weakens, the pipes will start to warp and eventually fall apart. This can cause all sorts of problems, from leaks to flooding. That’s why it’s important to ensure that joints are properly sealed when working with PVC plumbing. You should search for a plumber near me with experience in PVC plumbing so they can properly seal the joints in your home’s piping.

Pipe Hangers That Aren’t Distributed Evenly

If your PVC plumbing pipes are warping, it could be because the pipe hangers aren’t distributed evenly. When pipes are installed, they need to be supported evenly so that they don’t sag or warp over time. If the weight of the pipes is unevenly distributed, it can cause the pipes to warp. This can happen if the hangers are installed too close or too far apart. It can also happen if the hangers are made of different materials, which can cause one side to be heavier than the other.

To fix this problem, ensure that the hangers are evenly spaced and made from the same material. Also, check that the hangers are properly secured, so they don’t move around and cause further damage to the pipes. If you find the hangers are the problem, search for a plumber near me who can properly install them.

Exposure to Extreme Temperatures Changes

Are your pipes warping? It could be due to temperature changes. Extremely hot or cold weather can cause the plastic in your PVC plumbing pipes to change shape. When the temperatures outside fluctuate, so does the temperature of the water running through your pipes. If the water is too hot, it can cause the pipes to warp. This can lead to leaks and other plumbing problems. If you live in an area with extreme weather conditions, insulating your pipes is important to help prevent this from happening. In addition, you should always check your pipes for signs of damage after exposure to extreme temperatures and have them repaired or replaced by a plumber near me if necessary.

Sometimes, extreme temperatures are not from the weather but come from a water heater set too high. Check the thermostat on your water heater and ensure it is set to the recommended temperature. Also, a heat source near your pipes, such as a furnace, could cause the pipes to warp. Ensure there is at least a few feet of clearance between any heat source and your plumbing pipes.

Warping from Poor Drainage

Another common cause of pipe warping is poor drainage. If water is allowed to pool around your pipes, it can cause them to warp. This can happen if the slope of your yard isn’t adequate for proper drainage or if there is an obstruction in the drainpipes. Search for a plumber near me in Katy, TX who can assess your drainage situation and make any necessary repairs.

Heavy Loads on the Pipes

If your pipes are warping, it could be because they’re carrying a heavy load. This is especially common in older homes where the pipes may not be as strong as they once were. Over time, the weight of the water flowing through the pipes can cause them to sag or warp. This can lead to leaks and other plumbing problems. If you think your pipes are carrying a heavy load, have them inspected by a plumber near me. They can determine if the pipes need to be replaced or if there is another solution.

Take Action Before the Situation Gets Worse

Warped PVC plumbing pipes are not only unsightly, but they can also lead to bigger problems down the road if left untreated. If you have warped PVC plumbing pipes, chances are it’s due to one of the reasons listed above. Fortunately, most of these problems can be avoided with proper installation, maintenance, and care of your plumbing system. However, if you have warped pipes, search for a plumber near me who can assess the situation and make the necessary repairs. Don’t wait until the problem gets worse – take action now to prevent further damage to your plumbing system.

We Are the Plumbers to Call!

If you are looking for a plumber near me to help with your warped PVC plumbing pipes in Katy, TX, look no further than our team of experts at bluefrog Plumbing + Drain of West Houston. We have the experience and knowledge necessary to fix your problem quickly and efficiently. Contact us today to schedule a consultation.

Photo By SNEHIT PHOTO at Shutterstock

Call Now For
Emergency Service!

Emergency Plumber Memorial City, TX

bfpad Proactive Protection ProgramTM

Many of our customers are so happy with our service that they become a bfpad Proactive Protection Program™! Contact us to learn more.

  • Priority Service
  • Free Annual Plumbing Evaluation
  • 15% OFF Service